On Sale
WEBER FLOOR FLUID - Fiber-reinforced industrial self-leveling mortar.
CALL FOR PRICE+233598963402
Rapid self-leveling mortar for thicknesses from 8 to 50 mm
High-performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in a thick layer from 8 to 50 mm thick . Thanks to its self-leveling power, it allows you to obtain surfaces with high planimetry for laying light pavements, ceramics and technical floors with high productivity as it is suitable for pumping. It allows rapid commissioning both for transit and for covering the being ofsetting and quick drying, in addition to minimizing the appearance of cracks due toretraction compared to a conventional self-leveling device as it is retraction compensated. Suitable for underfloor heating and as a floating screed.
High-performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in a thick layer from 8 to 50 mm thick . Thanks to its self-leveling power, it allows you to obtain surfaces with high planimetry for laying light pavements, ceramics and technical floors with high productivity as it is suitable for pumping. It allows rapid commissioning both for transit and for covering the being of
Medium
Concrete, Cement mortar, Ceramic, Anhydrite, Metal, Wood, Synthetic.
| Product Details | |
| Product Code | 20200817 |
| Types of products | Grout |
| Weight | 25 Kg |
| Description | Grout, Technical Repairs |
| Material | The Best Material |
Scope of Use:
- Respect the mixing water according to the technical sheet.
- Use temperature, between 10 and 30ºC.
- During application, avoid drafts and direct sunlight on the material.
- Keep the application area ventilated to promote drying of the product.
- Tools can be cleaned with water immediately after use. The hardened material has to be removed mechanically.
- Drying of weberfloor fluid may be affected by existing temperature and humidity conditions.
- To obtain pavements with very good planimetry, the use of laser will be required to take the dimensions.
- In the case of large surfaces or high thickness, it must be pumped in sections based on the thickness, depending on the capacity of the mixing pump and the layer thickness required. Larger areas can be temporarily divided by delimiters. Likewise, in case of very high thicknesses it is advisable to make cuts every approx. 50m2.
Benefits of the Products:
- Great power of
leveling : very smooth surfaces with high planimetry. - Reinforced with fiberglass.
- Quick commissioning.
Retraction compensated: high resistance to cracking.- Pumpable. High productivity.
Restrictions:
- Do not apply weberfloor fluid on exterior floors. In this case, use weberfloor light structural, weberfloor firm or weberfloor 4630 industry lit.
- Do not apply weberfloor fluid on industrial floors or parking lots. Use in this case weberfloor dur, weberfloor for or weberfloor 4630 industry lit.
- For installation on soils with permanent humidity, with water table problems susceptible to humidity due to capillary rise, consult with our technical department.
- weberfloor fluid must be covered with the associated coatings from the previous section. As a final decorative mineral finish, use weberfloor design (consult technical department).
